Advantech AIMB-273 User Manual Download Page 69

Page: 69 / 102

AIMB-273 User Manual

Chapter 3

IOS Operation

3.2.3.5

Graphic Configuration



Primary Display

This item allows users to select which graphics controller to use as the primary
boot device.



Internal Graphics

This item allows users to enable or disable IGD.



GTT Size

This item allows users to select GTT size.



Aperture Size

This item allows users to select aperture size.



DVMT Pre-Allocated

This item allows users to select DVMT pre-allocated memory size.



DVMT Total Gfx Mem

This item allows users to select DVMT total memory size.



Gfx Low Power Mode

This item allows users to enable or disable IGD low power mode.



Graphic Performance Analyzers

This item allows users to enable or disable graphic performance analyzer func-
tion.

Summary of Contents for AIMB-273







































































































Search results

Summary of Contents for AIMB-273

Reviews:

Related manuals for AIMB-273

Brands by name

Popular brands

Advantech AIMB-273, User Manual

Search results

Summary of Contents for AIMB-273

Reviews:

Related manuals for AIMB-273

Brands by name

Popular brands