Advantech AIMB-225, User Manual

Page: 16 / 102

AIMB-225 User Manual 4
1.3.8 Rear I/O
 DVI-I: 1
 DP: 1
 Ethernet: 2
 USB: 4 (2USB2.0 & 2USB3.0)
 Audio: 1 (supports Line out, converts to Mic in or Line in)
 DC jack: 1 (2.5 mm)
1.3.9 Internal Connector
 LVDS & Inverter: 1
 USB: 4 (USB 2.0 compliant)
 Serial: 5 (4 x RS-232, 1 x RS-232/422/485; COM 1 supports RS-232/422/485
auto flow control; COM 5 supports 5 V/12 V by jumper selection)
 IDE: None
 SATA: 2
 SATA Power Connector: 2
 GPIO: 8-bit
 Mini PCIE slot: 2 miniPCIE slots, F/S supports mSATA; H/S supports wifi-mod-
ule only
 eDP: 1
 Parallel: 1
 PS/2 KB & MS: 1
1.3.10 Watchdog Timer
 Output: System reset
 Interval: Programmable 1 ~ 255 sec/min
1.3.11 Power Requirement
 Typical:
– Single Voltage 12 V DC input by 1 x External DC phone Jack or 1 x Internal
2x2-pin Power Connector;
– AT/ATX Supported by Jumper
– Max power consumption: 22.63 W (16 G DDR3 RAM)
1.3.12 Environment
 Temperature:
– 0 ~ 60° C (32 ~ 140° F), Operating
– -40 ~ 85° C (-40 ~ 185° F), Non-operating
1.3.13 Physical Characteristics
 Dimensions: 170 mm x 170 mm (6.69" x 6.69")