![background image](http://html1.mh-extra.com/html/advantech/aim-p707b0/aim-p707b0_startup-manual_2856518002.webp)
2
Indicator
Error
Charging Standby
Situation
Red
Blue1
Blue2
Blue3
Blue4
Green
1
X
X
X
X
X
X
2
***
***
***
***
***
***
3
X
X
X
X
X
V
4
X
X
X
X
X
*
5
X
*
X
X
X
V
6
X
V
*
X
X
V
7
X
V
V
*
X
V
8
X
V
V
V
*
V
9
X
V
V
V
V
V
10
V
X
X
X
X
X
11
*
X
X
X
X
X
Power Bar
Situation
RD Description
User Description
1
Not powered on
Not plugged
2
When each charging tray is powered on and
initializes, all 7 LEDS will flash three times.
Startup check. When it is plugged in, the system
will execute the startup check. All LEDs will
flash three times.
3
Charging tray has powered up with no bumper
jacket, the green light remains on.
Standby state. It is plugged with no bumper
jacket and no LED signal.
4
Blinking green represents bumper jacket has been
attached with its electric
charge
unknown. The
green light flashes once a second until next phase.
The light turns green when the bumper jacket is
attached. Wait 2 ~ 4 seconds for the light to turn
blue.
5
Bumper jacket is attached with electric
charge
less than (not including equal to) 25%.
Bumper Jacket is attached. Wait 2~4 seconds for
electric quantity checking and blue light will be
on. At least one blue light will be on.
6
Bumper jacket is attached with electric
charge
greater than or equal to 25% but less than (not
including equal to) 50%.
7
Bumper jacket is attached with electric
charge
greater than 50% but less than (not including equal
to) 70%.
8
Bumper jacket is attached with electric
charge
greater than 75% but less than (not including equal
to) 100%.
9
Bumper jacket is attached with electric
charge
equal to 100%.
10
Red light means problems have occured during
charging. Please verify FOD, other system errors
and other status that caused charging failure.
Once the red light is on, the charging will stop.
When the red light remains on, please pick up the
bumper jacket and replace it when the red light
goes off (approximately 10 seconds).
11
The LED monitors the charging tray. When
communication between LED board and the
charging tray fails, the red light will flash.
When the red light flashes, please shut down and
then restart the charging station.
Symbol
Description
V
On
X
Off
*
Blinking(Once a second)