3
Easy Setup
Safety Instructions
1.
Check the charging station is turn on.( please
charge more than 20 hours for the first time).
2.
When the bumper jacket is correctly connected to
the charging station (Please check the indicator
light status.)
3.
When the AIM-707A0 device is fully charged,
remove it from the wireless charger. (Check the
charging icon displayed on the charging station
front LED for the charging status)
4.
Please read these safety
instructions carefully and follow
these instructions for use. Repair
of the device may only be carried
by trained service personnel.
Advantech recommends that a
service contact be obtained with
Advantech service and that all
repairs also be carried out by
them; otherwise the correct
functioning of the device may be
compromised.
WARNING! Because of the danger of electrical shock,
never remove the cover of a device while it is
in operation or connected to a power outlet.
Use a damp cloth to clean the equipment and do not spray
detergent on the surface. Disconnect the equipment from
any AC outlet before cleaning.
If one of the following situations arises, have the
equipment checked by service personnel:
• The AC power adapter is damaged.
• The equipment does not power up even after charging.
• The equipment has obvious signs of breakage.
CAUTION! Do not replace the battery yourself. Please
contact a qualified technician or your retailer.
There is a danger of explosion if battery is
incorrectly replaced. Replace only with same
or equivalent type recommended by the
manufacturer.
FCC Compliance Statement
15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
