15
Notice
(a) TASK1 can change to TASK2 to TASK8 that depends on the tag in which TASK. The tag name
consists of the block type and ordinal number; for example, AI block with ordinal number 3, then
the tag name is AI3.
(b) DISP1 is the title of the display that is assigned in Display Property Menu.
(c) VIRTASK stores the VIRTAG tags that are added by the Add/Delete Virtual Tags menu.
(d) The maximum string length for string type tags is 128.
(3) Report Designer
(a) $NOW command applies to all tags created by
ADAMView
. Please refer to "The Tags Created by
ADAMView
".
(b) $HRnn, $MAX, $MAXT, $MIN, $MINT and $AVG commands only apply to the following tags:
•
Analog Input (AI)
•
Analog Output (AO)
•
Digital Input (DI)
•
Digital Output (DO)
•
Temperature (TMP)
•
Hardware Counter (CTFQ)
•
Hardware Alarm (ALM)
•
Time Stamp (TS)
•
Counter (CNT)
•
PID Control (PID)
•
On/off Control (ONF)
•
Ramp Block (RMP)
•
Moving Average (AVG)
•
Single Calculation (SOC)
•
DDE Client (DDEC)
•
VIRTASK's Tags (VIRTASK/User-defined Tag names)
(c) Add a new Decimal Formatting command. It is used to specify the number of decimal digits for
Report Designer. The old version is fixed to 2 decimal digits.
In
ADAMView 4.25
, it can be
config
ured by the user. The command format is as follows:
COMMAND.N
