Advantech ADAM-6217, User Manual

Page: 156 / 192

ADAM-6200 User Manual 150
$aaVd
Name Read GCL Internal Flags' (Auxiliary Flags) Values
Description This command reads all GCL internal flags' values from the specific
ADAM-6200 module.
Syntax $aaVd(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal slave net-
work address of the ADAM-6200 module. (Always 01)
Vd is the GCL Internal Flag command.
(cr) is the terminating character, carriage return (0Dh)
Response >aadddddddd(cr) if the command was valid.
?aa(cr) if an invalid command has been issued.
There is no response if the module detects a syntax error or communi-
cation error or if the address does not exist.
> delimiter indicating a valid command was received.
? delimiter indicating the command was invalid.
aa (range 00-FF) represents the 2-character hexadecimal slave
address of a module that is responding.
dddddddd is the hexadecimal representation of the GCL internal flag
value(s).
Each character represents 4 GCL internal flags' values.
(cr) is the terminating character, carriage return (0Dh)
Example This command reads all GCL internal flags values.
The characters "B" mean "1011" and character "2" means "0010",so
GCL internal flag 0, 1, 3, 5 are logic high while other GCL internal flags
are all logic low.
ASCII Command: $01Vd (cr)
Response: >010000002B(cr)