Advantech ADAM-4570 User Manual Download Page 51

Page: 51 / 74

Chapter 3

3.4.6 Advanced Settings

The serial device server provides the advanced settings for some special
applications which need critical time requirements. In normal applica-
tions, these settings are recommended not to be set to avoid the unusual
action happened.

Delay Time (ms)

When enabled, the serial port will postpone the received data for the time
interval you set, and then send the received data to the TCP/IP network.

Ignore Purge

Some application program will purge the serial port the first time opens
this serial port. You can ignore the purge command by enable this option.

Disable Character Timeout Detection

Enable this option will disable the serial port character timeout detection.

Disable Multiple Connection

Enabling this option will disable the multi-access function, thus the only
one TCP connection is allowed on this serial port.

Note These settings are just for special applications. We recom-

mend not enabling advanced settings in normal usage.

Summary of Contents for ADAM-4570











































































Search results

Summary of Contents for ADAM-4570

Reviews:

Related manuals for ADAM-4570

Brands by name

Popular brands

Advantech ADAM-4570, User Manual

Search results

Summary of Contents for ADAM-4570

Reviews:

Related manuals for ADAM-4570

Brands by name

Popular brands