![background image](http://html1.mh-extra.com/html/advantech/adam-2000-series/adam-2000-series_user-manual_2856818031.webp)
21
ADAM-2000 Series User Manual
Chapter 3
Installation
Guide
3.2.1.2
Router/End Device
Routers and End Devices must have to associate with corresponding Pair ID Coordi-
nator in
Initial Mode
to build up the wireless communication. The function is for
Router and End Devices only.
1.
Power on.
2.
All LEDs turn on for 0.5 second then turn off.
3.
Press the
Function Button
3 times to join a PAN with the default Pair ID 1.
4.
Status LED turns on, Error LED blinks.
5.
Level Index
turns on to indicate Pair ID 1. (Pair ID needs to be properly
configured if there are coordinators. For advanced settings, please refer to sec-
tion 3.3)
6.
If the Coordinator Pair ID is not 1, hold the
Function Button
for 2 seconds to
reboot your router or end-devices, then press
Function Button
5 times to enter
Pair ID selection, the click N times according the Coordinator Pair ID, then hold
the
Function Button
for 2 seconds to confirm your setting, finally press the
Function Button
3 times to join a PAN.
7.
Error LED turns off when it join a PAN.
Summary of Contents for ADAM-2000 Series
