ACP-1120 User’s Manual
16
2.2 Installation of ACP-1120 Series
The ACP-1120 can be of the two basic models, ACP-1120P2 series and
ACP-1120X2 series.
2.2.1 ACP-1120P2-20Z
ACP-1000P2-20Z comes with the PCA-6103P2V backplane and 200W
ATX PFC power supply.
For ACP-1120P2-20Z, please connect ATX power connector with PCA-
6103P2V backplane first, then use a orange-white wire (1700030500) to
connect between ATX feature-CN1 (5VSB_GND_PSON) of Backplane
and "ATX feature connector" (CN20) of SBC, finally connect POWER
SW wire with "ATX soft power switch"(CN21) of SBC to finish the
installation. By the way, don't forget to connect FAN1 ~ FAN5 to support
+12V for your system cooling fans. Refer Figure 2-17 and Figure 2-18.
WARNING:
Please consult your AE before the SBC installa-
tion. Most SBCs can be installed to ACP-
1120P2-20Z, such as PCA-6178, PCA-6276,
PCA-6277, PCA-6180, PCA-6181, PCA-6184,
PCA-6186. PCA-6001, PCA-6002, PCA-6003,
PCA-6004, PCA-6005
Figure 2.17: SBC Side of BP
Fan 4
Fan 3
ATX Connector
CN 1
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
