21
Chapter 3
•
Auto-Rebuild:
When one hard disk driver is failure, user may replace
it with a good one. The system will go into " Auto-Rebuild" mode
when IDE data mirroring board detecting a new hard disk driver plug-
ging in well and you may know the system in "Auto-Rebuild" model
from the status LED of IDE 0 and IDE 1.
3.2 Functions and Features
• Data mirroring: RAID Level 1. Backup data from one hard disk driver
to another one automatically.
• Plug and Play: No need to install any device driver
• OS Independence: Supports all operating system
• Auto Rebuild: Under system execution, if one hard disk driver is
replaced, IDE data mirroring board will rebuild data to new hard disk
right away.
• Hot-Swap: When one HDD failure, you could remove out the failure
HDD without system power off or shutdown.
• High Capacity: Hard disk driver capacity is limited in 128G Bytes for
S/W version 1.0
• System Indicators: Show system status by status LED of IDE 0 and IDE
1
• Hard Disk Compatibility: Supports most of all major brand's IDE hard
disk drivers, refer compatibility list
• Multi-boot System: Support System Commander, IBM OS/2 Boot
Manager,°Ketc.
• RAID Manager: Optional software that operates with RAID system and
allow user to monitor and remote monitor the status of RAID system
• JP3 Pin Definition:
Pin 1-2: Short=Master (Default) Open= Slave
Pin 3-4: Short=Mirror (Default) Open= No Function
Pin 5-6: Short=Enable Buzzer (Default) Open= Disable Buzzer
Pin 7-8: Short=Upgrade F/W Mode Open= Normal Mode (Default)
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
