9
STEP 1: Plugging in and screwing on the power supply cable
−
Plug the power supply cable into the
power supply plug-in location.
−
Tighten both mounting screws hand-
tight. The screws required for this are
already fixed in the delivered cable plug.
STEP 2: Secure the ring tongue of the power supply cable to the
ground bolt (important for correct grounding!)
NOTICE:
To make sure the device is
grounding correctly, it is important to
follow the correct order to put the
components on the ground bolt as
below (from inside to outside):
1. Place
toothed washer
first:
2. Then put the
ring tongue
of the
power supply cable (flat side
faces the DLT-V6210 connector
panel):
3. Place the
nut
and tighten it
hand-tight:
1
2
3
