background image

Heininger Holdings, LLC - 2222 Queen Street Bellingham, WA 98229-4753 

Ph: 360.756.2411 Toll Free: 888.722.5240 Fax: 360.756.2414 

Care and Maintenance 

As an extra precaution, we recommend you double check the hitch bolt and all 

tilt

AWAY

fasteners once a month (and every time you reinstall it, whichever is more often) to 
ensure everything is securely fastened and attached correctly.  Address anything that has 
loosened or shifted over time with vehicle/road vibration. 

When not in use but on the vehicle, lower arms and remove straps to avoid decay from
ultraviolet rays.

For proper operating performance, we recommend you clean your 

tilt

AWAY from time to

time with soap and water, to ensure salt, sand, grit and other debris do not interfere with

tilt

AWAY 's smooth operation. In winterized-salty conditions, wash the 

tilt

AWAY

thoroughly at least every week.

Please remember to remove your 

tilt

AWAY if you drive through an automated car wash.

Routine lubrication of 

tilt

AWAY is required around the T-handle shaft to

ensure the knob lifts easily and the platform rotates with ease.  Use 3-

In-One

®

 

Oil generously and often.

For more information on 3-In-One Oil, 

please visit 3inone.com 

Please share & show your use of the 

tiltAWAY by uploading photo/comments 

onto the 

Advantage

 Facebook page. 

Warning! 

Do not exceed load rating for the hitch-mounting bracket specified by its manufacturer.  Consult hitch-
mounting manufacture for load limit if not shown on mount or in the vehicle literature.  If load limit is 
unknown, limit rack capacity to 2 bikes.  This carrier has been designed to attach securely to a primary 
vehicle. It is not compatible with travel trailer, fifth wheel or RV applications. Your attachment is critical 
and beyond control of the manufacturer. The user of this carrier must secure it properly to the vehicle and 
you need to regularly inspect parts for tightness, wear and/or damage.  The Manufacturer is not responsible 
for and does not guarantee the attachment of this carrier to any vehicle, and is not liable for any damages 
resulting from its attachment.  

The liability of Heininger Holdings, LLC, is limited to the purchase 

price of the carrier components which prove defective in materials and/or workmanship

.  Be aware 

that some countries/states/provinces require an unobstructed view of the vehicle license plate.  If rack or its 
cargo obstructs the plate, you may need to relocate your license plate.  Consult your local vehicle code for 
restrictions and rules. 

Summary of Contents for SportsRack tiltAWAY






Reviews: