manualshive.com logo in svg

Advantage Fitness 16116738, Owner'S Manual, Page: 8 / 24

Share
Download
Advantage Fitness 16116738 Owner'S Manual Download Page 8

Customer Service 1-888-707-1880 
or email [email protected]                                               Dyaco Canada Inc. ©2014

 

7 

ASSEMBLY INSTRUCTION 

 

This manual is designed to help you easily assemble, adjust and use this machine. Please 
read this manual carefully. For the sake of familiarizing yourself with the parts identified in the 
instruction, first study the overview drawing. 
 
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts 
list for help to identify the parts. It will take two people to assemble your unit. 
 
Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid 
damaging parts, do not use power tools for assembly. 
 

 

STEP 1 ATTACH THE STABILIZERS   
 

1. 

Insert the rear support (2) into the main frame (1) and tighten securely with the button 
head bolts (M8x1.25x15mm)(46), lock washers (M8)(52), arc washers (M8)(53), and 
washers (M8)(54). 

2. 

Attach the front stabilizer (3) to the main frame (1) with the flat head bolts    
(M8x1.25x40mm) (47). 

NOTE:

 You can adjust the leveling caps (37) on the rear support (2) to keep the  

             bike stable.  

 

1

54

52

46

54

46

53

52

52

53

47

37

2

37

3

40

40

 

 
 
 
 
 
 
 

Summary of Contents for 16116738

























Reviews:

No comments