manualshive.com logo in svg

Advantage Fitness 16116738, Owner'S Manual, Page: 12 / 24

Share
Download
Advantage Fitness 16116738 Owner'S Manual Download Page 12

Customer Service 1-888-707-1880 
or email [email protected]                                               Dyaco Canada Inc. ©2014

 

11

 

STEP 5 ATTACH THE HANDLEBAR & COMPUTER 

 

1.  Attach the handlebar (6) to the upright (5) with button head bolts (M8x1.25x15mm)(46), 

lock washers (M8)(52), and washers (M8)(54). 

 
2.  Install 

one AAA

 batteries into the computer (33). See page 12 for detailed battery 

installation instructions. Remove the red strap from the sensor wire (34). Plug the sensor 
wire (34) into the 

computer

 (33), and push the excess wire back into the upright (5). Slide 

the 

computer

 (33) onto the plate on the handlebar (6). 

 

NOTE

:  Be careful not to damage the wires when sliding the 

computer

 (33).     

                              

                    

34

33

5

52

54

46

6

 

 

      NOW FIRMLY TIGHTEN ALL NUTS AND BOLTS 

         YOUR UNIT IS NOW FULLY ASSEMBLED 

 

 

Your cycle is equipped with adjustable end caps. 

If the unit is wobbly, please turn the leveling caps on  

the rear stabilizer to level the unit. 

Summary of Contents for 16116738

























Reviews:

No comments