User’s Manual
MX965Q2
65
z
Parallel
Port
Mode
This field allows you to set the operation mode of the parallel port. The setting “Normal”
allows normal speed operation, but in one direction only. “EPP” allows bidirectional parallel
port operation at maximum speed. “ECP” allows the parallel port to operate in bidirectional
mode and at a speed faster than the maximum data transfer rate. “ECP + EPP” allows
normal speed operation in a two-way mode.
z
EPP
Mode
Select
This field allows you to select EPP port type 1.7 or 1.9. The choices are “EPP1.9” and
“EPP1.7”.
z
EPP Mode Use DMA
z
POWER After PWR-fail
The options are [off], [on].
z
Onboard Serial Port 1/2/3/4
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”, and “Disabled” for the
on-board serial connector.
z
Serial Port 1/2/3/4 Use IRQ
This field allows you to set the IRQ of the serial port.
2.2.4.4 Onboard LAN Boot ROM
The options are [disabled], [enable].
