MX965Q2
62
2.2.4.1 OnChip IDE Device
z
IDE HDD Block Model
If the IDE hard drive supports block mode select Enabled for automatic detection of the
optimal number of block read/writes per sector the drive can support.
z
PCI Express IDE Controller
The default is [Auto].
z
IDE DMA Transfer Access
Use this field to enable or disable IDE DMA transfer access.
z
IDE Primary/Secondary Master/Slave PIO/UMDA
The channel has both a master and a slave, making four IDE devices possible. Because
two IDE devices may have a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to
be independent. The default setting “Auto” will allow auto detection to ensure optimal
performance.
z
On-Chip Primary / Secondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled
to active the primary/secondary IDE interface. Select Disabled to deactivate this interface.
The options: [Enabled], [Disabled]
