The other setting are:
•
image orientation: 0°, 90°, 180° (default) and 270°
The image is always in landscape mode (even when rotated from 90 or 270°)
Note: the sensor is mounted internally upside-down. Thus, if the camara stands
vertically with its base at the bottom, the configured orientation should be 180°.
•
image brighness: 0 (darkest) to 100 (brightest). Default is 50.
•
image contrast: -100 to 100. Default is 0.
•
image saturation: -100 to 100. Default is 0.
•
white balance: automatic (default), sunlight, tungsten light, fluorescent light,
incandescent light.
The effects of the settings are immediately visible on the live-view display.
5.2
Configuring through the USB flash drive
The parameters (date, time, image and timelapse parameters) can alternatively be set by
putting a configuration file on the USB flash drive. With this procedure, there is no need for a
WIFI capable device.
The steps to follow are:
1.
From an internet-connected computer, go to:
http://tools.advansee.com/beecam.php
2.
Once connected, the online configuration tool will allow you to set the different
parameters (interface is very similar to the one embedded in BEECAM®, thus refer to
§5.1 for details on the parameters).
Document: ADV_UM_9022_01_v1.5 - © ADVANSEE SARL 2015, All rights reserved
page 14