ENGLISH
BHS Series
| User manual
16
17
User manual
|
BHS
Series
17
BHS 800
BHS 1200
BHS 1800
Subwoofer
(BHS 800S / BHS
1200S / BHS 1800S)
Band-pass cabinet
8” custom ferrite
woofer - 1.5” VC
Bass reflex cabinet
12" custom ferrite
- 2.5” VC
Bass reflex cabinet
15" custom ferrite
- 2.5” VC
Satellite
(800T / 1200T /
1800T)
2-way, full range
LF : 5” / HF : 1”
horn loaded tweeter
2-way, full range
LF : 6.5” / HF : 1”
horn loaded driver
2-way, full range
LF : 8” / HF : 1”
horn loaded driver
Satellites dispersion
(H° x V°)
100 x 60
90 x 60
80 x 60
Frequency response
(entire system)
60Hz-20kHz
50Hz-20kHz
42Hz-20kHz
MAX SPL
120dB
124dB
126dB
Amplification
D Class
D Class
D Class
System peak power
800 W
1200 W
1800 W
Crossover slope and
frequency
24dB/Oct @ 200Hz
24dB/Oct @180Hz
24dB/Oct @ 140Hz
Input and output
connectors
2 x COMBO (XLR-F
+ 2 x jack 6,35mm.
1/4”) AUX IN: 1 x
mini-jack 3.5mm
TAPE IN: RCA L/R
LINE OUTPUT:
2 x XLR-M
SATELLITE OUT:
2 x SPEAKON
2 x COMBO (XLR-F
+ 2 x jack 6,35mm.
1/4”) AUX IN: 1 x
mini-jack 3.5mm
TAPE IN: RCA L/R
LINE OUTPUT:
2 x XLR-M
SATELLITE OUT:
2 x SPEAKON
2 x COMBO (XLR-F
+ 2 x jack 6,35mm.
1/4”) AUX IN: 1 x
mini-jack 3.5mm
TAPE IN: RCA L/R
LINE OUTPUT:
2 x XLR-M
SATELLITE OUT:
2 x SPEAKON
Controls
Main Level, Sub
level, 0°-180°
phase reverse,
STEREO/MONO
switch, GND and
ON/OFF switches
Main Level, Sub
level, 0°-180°
phase reverse,
STEREO/MONO
switch, GND and
ON/OFF switches
Main Level, Sub
level, 0°-180°
phase reverse,
STEREO/MONO
switch, GND and
ON/OFF switches
Protections
Short circuit,
over-current,
Dual-limiter
Short circuit,
over-current,
Dual-limiter
Short circuit,
over-current,
Dual-limiter
6
|
TECHNICAL SPECIFICATIONS
5
|
TROUBLESHOOTING
PROBLEM
LED
SOLUTION
No sound or very low
sound level
Power LED turned
off.
Make sure the system is properly connected to the
mains outlet. Make sure that mains plug is firmly
inserted into the socket.
Power LED turned
on, but low MAIN
LEVEL.
Turn the MAIN LEVEL knob clockwise.
Make sure the SIG LED is on.
Check the signal cable.
Distortion
SIG/CLIP LED
lit red
Lower inputs and/or MAIN LEVEL knob.
Led SIG/CLIP
verde
Controllate il livello della sorgente.
Controllate la perfetta connessione fra subwoofer
e i satelliti.
Booming sound
Lower SUB level.
Check satellites connections.
Harsh sound
Raise SUB level.
Lower MAIN LEVEL knob.
Noise / hum
Activate the GND LIFT switch on subwoofer back
panel, if the problem remains, press the GND LIFT
switches of all the amplifiers/devices connected
to the system.
Use only balanced cables, avoid using unbalanced
cables.
Try to connect your entire system under the same
electric current line, so that all the equipment
shares the same AC Ground.