5/23/2019
Document Kiosk
Assembly and Operation Instructions
11
Head Area
The head area of the kiosk is accessed by unlocking the lock on the top of the kiosk, and
pulling the face towards the keyboard. The face can be removed entirely from the kiosk if
needed. There is a cotter pin that is located at the bottom of the kiosk face, under the slot
that the door slides into, which will need to be removed. After disconnecting the chain,
then in the open position, unfasten all connections between the kiosk enclosure and the
head area, and then lift straight up. In this area you have access to the monitor controls,
keyboard, computer and other peripherals.
Kiosk With Front Face Open
Vibration Mounted Computer
Note: Do not overtighten the vibration mounts, only hand-tighten.
