manualshive.com logo in svg

Advanced Instruments Anoxomat Mark II CTS, User Manual

Share
Download
Advanced Instruments Anoxomat Mark II CTS User Manual Download Page 50

Copyright

This user’s guide is copyrighted by Advanced 
Instruments with all rights reserved. Under copyright 
laws, this guide may not be reproduced in any form, 
in whole or part, without the prior written consent of 
Advanced Instruments.

Advanced Instruments has reviewed this guide 
thoroughly. All material contained within is believed 
reliable, but the accuracy and completeness are not 
guaranteed or warranted, and are not intended to be 
representations or warranties concerning the 
product described.

Windows CE® and Microsoft Excel® are registered 
trademarks of Microsoft Corporation in the United 
States and other countries. Intel® is a registered 
trademark of Intel Corporation in the United States 
and other countries. Halamid® is a registered trade 
mark of VEIP Disinfectants. All other trademarks are 
the property of Advanced Instruments.

Hot-Line™ Technical Service

If you have any questions or problems regarding the 
proper operation of your instrument, please contact 
our Hot-Line Technical Service department by 
calling one of the following numbers.

800-225-4034 (toll-free within the USA and 
Canada, 8:00am–4:30pm EST; after normal 
business hours, dial 781-320-9000)
+1 781-320-9000 (elsewhere)
+1 781-320-0811 (fax)

 

Hot-Line™ Technical Service

 Advanced Instruments and worldwide distributor network provides 24/7 comprehensive customer service and technical support.

This user’s guide is copyrighted by Advanced Instruments with all rights reserved. Under copyright laws, this guide may not be reproduced in any form, in whole or part, without the prior written consent of 
Advanced Instruments.
©2017 Advanced Instruments. Advanced and Anoxomat are registered trademarks of Advanced Instruments. All other trademarks are the property of their respective companies.

112005UG RevA-2 0609 16

The management system governing the 
manufacturing of this product is ISO 9001 
and ISO 13485 registered.

IVD

Two Technology Way 

|

 Norwood, MA 02062 

For more information 

|

 800-225-4034 

|

 +1-781-320-9000  

Online 

|

 aicompanies.com 

|

 info

@

aicompanies.com

Summary of Contents for Anoxomat Mark II CTS



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands