Advanced Instruments 4250, User Manual

Page: 33 / 121

2
Instrument Operation
In order to run your instrument properly, it is important that
you read and adhere to the instructions in this section. For
information on calibration, see Chapter 4 — Calibration.
Hazardous material cautions
• WARNING : Handle all biohazardous materials according to
established good laboratory practices and follow your institution’s
exposure control plan. Universal precautions is an approach to
infection control, where animal body fluids and proteins are treat-
ed as if known to be infectious. Use personal protective equip-
ment such as gloves, gowns, etc., to prevent exposure. Store bio-
hazardous materials in regulated waste containers and dispose of
these materials in a safe and acceptable manner that is in compli-
ance with all country, state and local requirements.
CAUTION T he heat transfer fluid contains hazardous chemicals.
Consult the material safety data sheet (MSDS) and
use appropriate personal protective equipment.
•
Heat transfer fluid can become contaminated with sample
material which may be considered a biohazard. Use appropri-
ate cautions during removal and disposal of sample tubes after
testing to prevent heat transfer fluid remaining on the tube
exterior from contacting personnel or the instrument surface.
• If a biohazardous material is spilled on or inside the equipment,
decontaminate the equipment using a 1% bleach solution, or as
outlined by those policies and procedures established within your
institution.
• To avoid injury or fire hazard, do not operate this product in an
explosive atmosphere.
11