Advanced Instruments 3300, User Manual

Page: 34 / 77

c) Press both soft key buttons to save the new date setting and
return to the diagnostic test menu.
6. If you choose to set the time
a) Select between AM/PM and 24-hour formats. After you select a
display format, your instrument will display the current time in
the selected format.
b) Use the right keypad to toggle between hours and minutes and
the left keypad to change the number of hours or minutes dis-
played.
c) Press both soft key buttons to save the new time setting and
return to the diagnostic test menu.
Set Probe Bin #'s
To reset the block and sample probe bin numbers, take the following
steps:
1. At “ Osmometer Ready ” , the two multifunction soft keys are labeled
[CALIB] and [DIAG] , respectively. Press the soft key labeled
[DIAG] to enter the diagnostic test menu.
2. While you are within the diagnostic test menu, the soft key labels
will change to [START] and [INDEX] . Use the [INDEX] soft key
to cycle through your choices until you see “ 3. Set Probe Bin #’s ”.
3. Press [START] to enter the selection menu.
4. Press the right [ INDEX ] soft key to advance the probe bin #, or
press the left [ NEXT ] soft key to advance to the next probe bin #.
Be sure to record the new bin settings in the Service Log at the back
of this user's guide.
5. Press [ NEXT ] soft key to advance to the save options.
6. Select [ YES ] to save the new setting, or [ NO ] if no change was
made.
Advanced
®
Osmometer Model 3300 User’s Guide
16