I OPERATION AND CONTROL :
ffiitiihh
Turning On Main Switch
1,Shifting the switch to RUN position
then can turn on the power supply of car.
2,Shifting the switch to OFF position
then can turn off the power supply of car.
Key Switch
1, Plugging in the key and turn right
t h e n c a n t u r n o n t h e k e y
switch(Note:Shifting the
FIR
switch to
the middle position before turning on
Main switch).
2, Turning left and then can turn off
the switch.Switch can be removed only
at this state.
Forward/Reverse Switch
The Forward/Reverse Switch is used to
shift the car to forward,reverse or
stop.Forward for upward,Reverse for
downward,Park for middle.When choosing
reverse switch,the reverse buzzer sounds.
Completely stopping car before shifting F/R
switch.When shifting F/R switch,please turn switch to
middle positon for 2s at first, then choosing Forward
switch or Reverse switch.Don't shifting F/R switch in a
hurry in case that the sensor will be burnt or switch will
be out of use.
25
OPERATION AND CONTROL
Combined Switch
includes:horn,side light, wiper switch;
End button is horn switch;shifting
forward to turn on right side
light;shifting backward to turn on left
side light;shifting upward to turn on
wiper.
48V Voltage Indicator
Voltage Indicator is to show the electricity
and remains custom to charge on time. The
voltage will shows fulled charged when
charing enough time.
L Electricity display reduce with the
consumption of electricity during working;
2, When electricity is close to little
electricity warning,it was showed by
moving between first space and second
space;
3, When electricity enters into under
electricity warning,it was displayed by
flashing of first space in left.
Scrape switch
Press on the Scrape switch to enable the
scrape work.
Accelerator Pedal
Turning on the key switch,choosing right
gear,then loosing hand brake,putting your
foot on accelerator pedal and pressing down
slowly. Do not accelerate too fast.
26
