Advanced Energy Thyro-S 1S H 1 Series, Manual

Page: 8 / 54

6
Contact 2
Safety instructions 3
Safety regulations 9
Remarks on the present operating instructions and Thyro-S 12
1. Introduction 13
1.1 General 13
1.2 Specific characteristics Thyro-S 13
1.2.1 Additional for 1S…H RL1 14
1.3 Type designation 14
2. Functions 15
2.1 Operating modes 15
2.1.1 Digital set point value inputs 15
2.1.2 Switching behaviour 15
2.2 Indications 16
2.3 Monitoring 16
2.3.1 Monitoring of the mains voltage 16
2.3.2 Equipment temperature monitoring 16
2.3.3 Ventilator monitoring 16
2.4 Additional indications using type S...H RL1 17
2.4.1 Error indication relay K1 17
2.5 Additional monitoring using type S...H RL1 17
2.5.1 Thyristor short-circuit monitoring 17
2.5.2 Load monitoring (undercurrent monitoring) 18
2.5.3 Load monitoring (overcurrent monitoring) 18
3. Operation 20
3.1 Configuration switch S1 20
3.2 Thyro-Tool Family 21
3.3 Diagnosis / status indications 21
4. External connections 23
4.1 Power supply for Thyro-S 23
4.2 Power supply for the control electronics 23
4.3 Additional control voltage input 23
4.4 Digital set point input 24
4.5 Block diagram 1S...H 1 25
4.6 Connections and terminal strips 1S...H1 26
4.7 Block connection diagram 1S ... H RL1 27
4.8 Connections and terminal strips 28
CONTENTS