Advanced Energy Thyro-S 1S H 1 Series, Manual

Page: 48 / 54

46
13. APPROVALS AND CONFORMITIES
No product norm exists for Thyristor switches so that a useful norm
structure can be built up based on the corresponding basic norms
ensuring reliable application and comparison potential.
CAUTION
Thyristor switches are not devices for disconnection in the sense of
EN 50110-1 and may therefore be operated only in connection with a
suitable mains isolating device (e.g. switch, isolating link).
Approvals and conformities for Thyro-S are available
• Quality standard according to EN ISO 9001
• UL registration, file no. E 135074, with consideration to Canadian
National Standard C 22.2 No. 14-95
• UL Markings:
· Tightening torque (in pound inches) see Chapter 10.
„Technical data“
· Use 75°C Copper Conductors only (except for control circuits)
· „Max. surrounding air temperature 40°C“
· Suitable For Use On A Circuit Capable Of Delivering Not More
Than 100kA rms Symmetrical Amperes, xxx Volts Maximum, When
Protected by RK5 Class Fuses“
NOTE:
xxx = max. allowable voltage depending upon rating of the device
· „Branch circuit protection must be provided and sized according
National Electrical Code and any additional local codes“
• CE conformity
• Low voltage directive 2006/95/EG
• EMV directive 2004/108/EG
• RoHS compliant 5/6