ACR3901T-W1 – Reference Manual
Version 1.02
www.acs.com.hk
Page 95 of 100
Byte Address
Memory byte address location of the word to be erased
Response Data Format (
abData
field in the
RDR_to_PC_DataBlock
)
SW1
SW2
Where:
SW1 SW2
= 90 00h if no error
7.2.9.5.
ERASE_APPLICATION_ZONE_WITH_ERASE
This command can be used in the following cases:
1. AT88SC101: To erase the data in Application Zone with EC Function Disabled.
2. AT88SC102: To erase the data in Application Zone 1.
3. AT88SC102: To erase the data in Application Zone 2 with EC2 Function Disabled.
4. AT88SC1003: To erase the data in Application Zone 1.
5. AT88SC1003: To erase the data in Application Zone 2 with EC2 Function Disabled.
6. AT88SC1003: To erase the data in Application Zone 3.
The following actions are executed for this command:
1. Present the specified code to the card.
a. Erase the presentation error counter. The data in corresponding Application Zone can be
erased when the submitted code is correct.
Command Format (
abData
field in the
PC_to_RDR_XfrBlock
)
Pseudo-APDU
CLA
INS
Error
Counter LEN
Byte
Address
MEM_L
CODE
Byte 1
Byte 2
…
…
Byte N
FFh
20h
00h
Where:
Error Counter LEN
Length of presentation error counter in bits. The value should be 00h
always.
Byte Address
Byte address of the Application Zone Key in the card. Please refer to
the table below for the correct value.
Byte
Address
LEN
AT88SC101: Erase Application Zone with
EC function disabled
96h
04h
AT88SC102: Erase Application Zone 1
56h
06h
AT88SC102: Erase Application Zone 2 with
EC2 function disabled
9Ch
04h
AT88SC1003: Erase Application Zone 1
36h
06h
