Advanced Card Systems Ltd. ACR3901T-W1, Reference Manual

Page: 18 / 100

ACR3901T-W1 – Reference Manual
info@acs.com.hk
Version 1.02
www.acs.com.hk
Page 18 of 100
6.1.5. Bluetooth Communication Protocol
The ACR3901T-W1 communicates to the paired device using the Bluetooth interface with a
predefined protocol. The protocol is similar to the formats of the CCID Command Pipe and Response
Pipe.
Command Mode supported Sender Description
62h Authenticated
Paired
device
ICC Power On
63h Authenticated
Paired
device
ICC Power Off
65h Authenticated
Paired
device
Get Card Presence
6Fh Authenticated
Paired
device
Exchange APDU
67h Authenticated
Paired
device
Exchange APDU2
61h Authenticated
Paired
device
Set Parameters
6Bh Authenticated
Paired
device
Peripheral Commands
70h Connected/Authenticated
Paired
device
SPH_to_RDR_ReqAuth*
71h Connected/Authenticated
Paired
device
SPH_to_RDR_AuthRsp*
Table 8 : Command Code Summary
Command Mode Supported Sender Description
12h Authenticated Reader Response to ICC Power On
13h Authenticated Reader Response to ICC Power Off
14h Authenticated Reader Response to Get Card Presence
11h Authenticated Reader Response to Exchange APDU
17h Authenticated Reader Response to Exchange APDU2
16h Authenticated Reader Response to Set Parameters
15h Authenticated Reader
Response to Peripheral
Commands
20h Connected/Authenticated Reader RDR_to_SPH_AuthRsp1*
21h Connected/Authenticated Reader RDR_to_SPH_AuthRsp2*
Table 9 : Response Code Summary
*Note: These command/response codes are the communication codes being used in Mutual
Authentication.