Advance acoustic SC3000 26" Disc, Service Manual

Page: 8 / 70

GENERAL INFORMATION
ENGLISH
SERVICE MANUAL
6 9099052000 SC3000 26” Disc
TECHNICAL DATA
General technical data
Description SC3000 26” Disc
Cleaning width 26 in (660 mm)
Squeegee width 35 in (890 mm)
Solution/clean water tank capacity 21 US gal (80 L)
Solution flow da 0,26 a 0,8 US gal/min. (from 1 to 3 L/min.)
Recovery tank capacity 21 US gal (80 L)
Minimum/maximum solution flow (with and without EcoFlex™ system) 0 ÷ 0,8 US gal/min. (0 ÷ 3 L/min.)
EcoFlex™ system solution tank capacity 1,3 US gal (5 L)
EcoFlex™ system detergent flow setting Ratio 1:400 ÷ 1:33
Rear wheel diameter 9.8 in (250 mm)
Front wheel specific pressure on the floor (*) 72 psi (0,5 N/mm
2
)
Rear wheel specific pressure on the floor (*) 130 psi (0,9 N/mm
2
)
Front steering, driving and braking wheel diameter 8,8 in (225 mm)
Vacuum system motor power 0.56 hp (420 W)
Drive system motor power
0.4 hp (300 W)
Maximum speed 3.7 mi/h (6 km/h)
Maximum gradient when working 2% (1,14°)
Sound pressure level at workstation (ISO 11201, ISO 4871, EN 60335-2-72) (LpA) 65 dB(A) ± 3 dB(A)
Machine sound pressure level (ISO 3744, ISO 4871, EN 60335-2-72) (LwA) 82 dB(A)
Vibration level at the operator’s arms (ISO 5349-1, EN 60335-2-72) < 98.4 in/s
2
(< 2,5 m/s
2
)
Vibration level at the operator’s body (ISO 2631-1, EN 60335-2-72) 3.1 in/s
2
(0,8 m/s
2
)
Battery compartment size (length x width x height) 14,9 x 21,2 x 11,8 in (380 x 540 x 300 mm)
Battery type
4 x 6 V batteries, 180 Ah C5 (WET)
4 x 6 V batteries, 180 Ah C5 (GEL/AGM)
Standard batteries autonomy 2.5 - 3.5 hours
Total electrical input 60 A
Machine height 46,8 in (1.190 mm)
Machine maximum length 53.5 in (1.360 mm)
Machine width without squeegee 26.4 in (670 mm)
Vacuum system circuit capacity 0.0098 MPa (1.000 mmH
2
O)
Machines have been tested under the following conditions: (*)
With operator [165.3 lb (75 kg)] if ride-on •
Maximum battery size •
Maximum brush and squeegee size •
Full clean water tank •
Optional components installed •
Weight on wheels checked •
Print on the floor checked on cement for each single wheel •
Result expressed as maximum value for front and rear wheels •
A2 ENGLISH(2).indd 6 29/07/2011 17.02.31