Advance acoustic SC3000 26" Disc, Service Manual

Page: 49 / 70

OTHER SYSTEMS
SERVICE MANUAL
ENGLISH
SC3000 26” Disc 9099052000 47
OTHER SYSTEMS
SCREW AND NUT TIGHTENING CHECK
Drive the machine on a level floor with the recovery tank empty. 1.
Turn the ignition key to “0” and disconnect the batteries. 2.
Carefully lift the tank assembly. 3.
Then check: 4.
Tightening of mounting screws and nuts •
Correct position of fasteners •
Visible faults in the components •
Leaks •
Carefully lower the tank assembly. 5.
FRONT FAIRING DISASSEMBLY/ASSEMBLY
Disassembly
Drive the machine on a level floor with the recovery tank empty. 1.
Turn the ignition key to “0” and disconnect the batteries. 2.
Unscrew the steering wheel screw (A). 3.
Remove the steering wheel assembly (B), disconnect the wiring harness connection. 4.
Remove the cover (C), then remove the Seeger ring (D). 5.
Remove the caps, the screws (E) and the steering wheel plate (F). 6.
Disconnect the ignition switch wiring harness. 7.
Remove the screws (G), recover the washers, disconnect the wiring harness and then remove the drive pedal (H). 8.
Remove the adjustable heel support (I) and recover the spring (J). 9.
Remove the caps, the screws (K) on the machine front and recover the washers. 10.
Remove the caps, the screws (L) on the machine foot board and recover the washers and the nuts. 11.
Carefully remove the front fairing (M). 12.
Assembly
Assemble the components in the reverse order of disassembly. 13.
A2 ENGLISH(2).indd 47 29/07/2011 17.03.04