background image

KOMPONENTEN EIN- UND AUSBAUEN
EXCHANGING PARTS
REMPLACER DES ÉLÉMENTS

1 Sitzbrett:

 Wird am hinteren 

Ende der Sitz fläche heraus-
gezogen, zuerst muss jedoch die 
Klettsicherung gelöst werden.

2 Luft-Schaum Protektor-Element: 

Zugang mittels Reissverschluss 
im Protektorfach. Achte beim 
Einbau darauf, dass die Keilform 
richtig eingesetzt wird und der 
Klett an der Vorderkante sauber 
fixiert ist.

3 Schaum Protektorelement: 

Zugang mittels Reissverschluss 
im Protektorfach. Achte beim 
Einbau darauf, dass das Label 
«FRONT» vorne positioniert 
wird.

4 Beschleunigungssystem: 

Brummelhaken ausschlaufen 
und Knoten des elastischen 
Rück holers lösen, anschliessend 
Beschleuniger-Leinen ausfädeln. 
Der elastische Rückholer kann 
separat ersetzt werden.

1 Seatboard: 

Pulled out from 

lower rear end of seat shell, 
after releasing the Velcro.

2 Air-foam protector element: 

Accessed via a zipper in the 
protector compartment. When 
installing, make sure that 
the wedge shape is inserted 
correctly, and that the Velcro is 
fixed at the front edge.

3 Foam protector element: 

Accessed via a zipper in the 
protector compartment. When 
installing, make sure that the 
label "FRONT" is positioned at 
the front.

4 Speed system: 

Unloop the 

Brummel hooks and untie the 
knots of the elastic retainer, then 
unthread the speed lines. The 
elastic retriever can be replaced 
separately.

1 Planche d’assise : 

Se retire à 

l’arrière, en bout d’assise, après 
avoir ouvert le velcro de sécurité. 

2 Élément de protection 
mousse et air : 

Accès au moyen 

d'une fermeture éclair dans le 
compartiment de protection. 
Lors du montage, veille à ce que 
la protection soit correctement 
insérée et que le velcro soit 
proprement fixé sur le bord avant.

3 Élément de protection en 
mousse : 

Accès par fermeture 

éclair dans le compartiment de 
protection. Lors du montage, 
veille à ce que l'étiquette "FRONT" 
soit positionnée à l'avant.

4 Accélérateur : 

Retire les 

attaches rapides et dénoue les 
nœuds palstek de l'élastique de 
rappel, puis retire les cordes de 
l'accélérateur. L'élastique de rappel 
peut être remplacé séparément.

2

3

1

3

4

37

36

Summary of Contents for BOUNDLESS























Reviews: