E
N
G
L
IS
H
Package contents:
Bluetooth Optical Mouse
2x AAA 1.5V batteries
User manual
Installation Guide:
Step 1: Installing batteries
Whenever new batteries are installed, make sure that they are fresh 1.5V AAA batteries.
Remove the battery cover.
Insert two AAA batteries into the battery compartment, make sure to properly orient the positive and negative
ends (+/-) as specified by the marks in the battery compartment. Replace the battery cover and make sure it is
locked.
Switch on the mouse, LED light will blink.
Step 2: Connecting the Bluetooth mouse
Before you install the Bluetooth mouse, please make sure that your computer supports Bluetooth function, and
finishes the Bluetooth software installation. Press the Link button for 2 seconds, the LED light in „DPI-adjusting
button“ will shine, it´s now searching the Bluetooth device. Then please follow the below procedures to install the
mouse (It can slightly differs according to the Bluetooht software):
Make sure that the Bluetooth function has been activated. Double click the Bluetooth Icon on the Task Bar or in
the Control Panel, click „Add a Bluetooth device“.
Select „My device is set up and ready to be found“, click „Next“.
Select Bluetooth mouse, click „Next“.
Select „Don´t use a passkey“, click „Next“ and then „Finish“.
Note: If you use other Bluetooth software, the installing procedure may be similar. You need to try and understand it
by yourself.
Low-voltage alarming function: when batteries have been used for some time and discover the LED light in
„DPI-adjusting button“ blinks automatically, which reminds you that batteries´voltage is becoming low,
suggested you replace the batteries with new ones.
Description of keys and DPI Adjustment:
Using „DPI-adjusting button“, the resolution of mouse can be switched among 1000 / 1600 DPI in turn.
Backward and Frontward buttons for your easily navigating forward and backward on the internet.
EN
05
i-tec BlueTouch 243
