background image

61203060L1-1A

© 2003 ADTRAN, Inc.

15

List of Figures

Figure 1-1. TSU LT - Front Panel  ............................................................................................................19
Figure 1-2. TSU LT - Rear Panel  .............................................................................................................19
Figure 1-3. Simple Bridge Application on a T1 or an FT1 Circuit  ..........................................................20
Figure 2-1. TSU LT Rear Panel ................................................................................................................23
Figure 2-2. TSU LT Interfaces  .................................................................................................................24
Figure 3-1. TSU LT Front Panel ...............................................................................................................27
Figure 3-2. TSU LT Main Menu Screen ...................................................................................................28
Figure 3-3. TSU LT Main Menus .............................................................................................................29
Figure 3-4. Cursor on Menu Item  .............................................................................................................31
Figure 3-5. Submenu Fields ......................................................................................................................31
Figure 4-1. Status Menu Tree  ...................................................................................................................35
Figure 4-2. Severely Errored Seconds Screen  ..........................................................................................36
Figure 4-3. Loss of Signal (Current Errors/Alarms) Screen .....................................................................36
Figure 4-4. Clear History Screen  ..............................................................................................................37
Figure 5-1. Configuration Menu Tree .......................................................................................................39
Figure 5-2. Network Submenu ..................................................................................................................40
Figure 5-3. Network Timed Clock Source ................................................................................................41
Figure 5-4. DTE Clock Source  .................................................................................................................41
Figure 5-5. Internal Clock Source .............................................................................................................42
Figure 5-6. Configuration Submenu  .........................................................................................................42
Figure 5-7. Inband Remote Configuration ................................................................................................46
Figure 6-1. Utility Menu Tree ...................................................................................................................47
Figure 6-2. Address Screen .......................................................................................................................48
Figure 7-1. Test Menu Tree  ......................................................................................................................49
Figure 7-2. Network Loopback Tests  .......................................................................................................50
Figure 7-3. Self Test Results Screen .........................................................................................................51
Figure 7-4. Port Loopback Tests ...............................................................................................................52
Figure A-1. TSU LT Menu Tree (Status and Config) ................................................................................55
Figure A-2. TSU LT Menu Tree (Util and Test) ........................................................................................56

Summary of Contents for TSU LT

































































Reviews: