ADTRAN TSU 120, User Manual

Page: 75 / 143

Chapter 3. Operation
61200.129L1-1 TSU 120 User Manual
61
Configuration (CONFIG)
The Configuration menu is used to set the TSU 120
operational configuration, including all network
interface parameters and the allocation of the DS0s
and the port parameters. See Figure 3-11.
2) CONFIG
2) UNIT
1) COPY A > TEMP
2) CREATE TEMP
3) REVIEW MAP A
4 )REVIEW TEMP
5) EDIT TEMP
6) APPLY TEMP >A
5) DS0 MAP A
6) 0.2 DS0 MAP B
1) COPY B > TEMP
2) CREATE TEMP
3) REVIEW MAP B
4) REVIEW TEMP
5) EDIT TEMP
6) APPLY TEMP > B
4) MAP IN USE: A (B)
7) PORT CONFIG
3) MAP EXCHANGE
1) MAP A @:HH:MM
2) MAP B @:HH:MM
OFF
AUTO
1) NETWORK (NI)
1) FORMAT
2) CODE
3) YEL ALARM
4) XMIT PRM
5) TIMING MODE
6) SET LBO
7) INBAND LPBCK
8) BIT STUFFING
1) CNTRL PORT
2) TRAPS
3) ACCESS
4) MODEM INIT
5) EXIT TERM MODE
0.1 Nx56/64
0.2 DSX-1
(OPTION PORTS)
1) FORMAT
2) CODE
3) YEL ALARM
4) LINE LENGTH
5) INBAND LPBCK
6) ROB BIT SIG
1) RATE 56/64
2) TX CLK CNTRL
3) DATA
4) CTS
5) DCD
6) DSR
7) "0" INHIB
8) INBAND
Figure 3-11
Configuration Menu Tree