background image

14

Section 61246026L6-5, Issue 2

61246026L6-5B

Figure 14.  Alarm History

Figure 15.  Set Time/Date/Circuit ID

CIRCUIT ID:                                                   01/01/99  00:12:45
                              T1 Alarm History
LOCATION   ALARM       FIRST                LAST                 CURRENT   COUNT
--------------------------------------------------------------------------------
HTU-C      RED(LOS)                                              OK         000
 (DSX-1)   YELLOW                                                OK         000
           BLUE(AIS)                                             OK         000

HTU-R      RED(LOS)                                              OK         000
 (DS1)     YELLOW                                                OK         000
           BLUE(AIS)                                             OK         000
                              HDSL Span History
--------------------------------------------------------------------------------
SPAN 1     LP1 HLOS                                              OK         000
           LP2 HLOS                                              OK         000

HTU-C      LP1 MRGN                                              OK         000
           LP2 MRGN                                              OK         000

HRE-1      LP1 MRGN                                              OK         000
           LP2 MRGN                                              OK         000

    Press: C to clear history : H to scroll span alarms : M for main menu

CIRCUIT ID:                                                   01/01/99  00:13:03

                            SET TIME/DATE/CIRCUIT ID

                           1) SET TIME
                           2) SET DATE
                           3) SET CIRCUIT ID

              Choose an option by pressing the corresponding number.
                         Press “M” to return to Main Menu.

Summary of Contents for T200 FNID
























Reviews: