background image

Important Safety Instructions

When using your telecommunications equipment, basic safety precautions should always be followed to reduce the risk of fire, electric

shock and injury to persons, including the following:

1.

Use only the power adaptor that is included with the device.

2.

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.

3.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric
shock from lightning.

4.

Do not use the telephone to report a gas leak in the vicinity of the leak.

5.

CAUTION

- To Reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

WEEE Statement

The WEEE logo (shown at the left) appears on the product to indicate that this product must not be disposed of or dumped
with your other household wastes. You are required to dispose of your electronic or electrical waste equipment by delivering
it to the specified collection point for recycling of such hazardous waste.

Summary of Contents for SmartRG SR400ac














Reviews: