Optional Wall Mount
Using a Phillips-head screwdriver, remove the mount
from its present location on the bottom of the gateway.
Slide the mount onto the back of the gateway and
tighten the screw located in the bottom of the mount.
Using the template below, attach the two included
screws to the wall. Using wall anchors is
recommended.
Slide the back of the mount down on the screws.
4 1/8” (104mm)
Gateway
Front
1/16” (2-3mm)
Wall Anchor
Summary of Contents for SmartRG SR400ac
Page 1: ...SR400ac Quick Start Guide...