ADTRAN SMART/RG SR516ac, Quick Start Manual

Page: 8 / 12

WPS Method
If the device you wish to connect to the Internet via your gateway supports the WPS secure Wi-Fi connection method,
follow these steps.
1. In the left navigation bar, click Wireless , click the band that you want to configure, and then click Security .
2. In the Enable WPS field, make sure that Enabled is selected, and then click Apply/Save to save your change.
3. On the left side of the gateway:
a. Activate the desired band by pressing 2.4 GHz or 5 GHz briefly on the rocker switch.
b. Activate WPS by pressing the desired band button and holding it down for 7 seconds.