Physical Descriptions
NetVanta 3100 Series Hardware Installation Guide
24
Copyright © 2015 ADTRAN, Inc.
61700600L2-34C
NetVanta 3140 Panel Interface
Power Connection
The rear panel has a connection to an AC auto-ranging power, 100 to 240 VAC, 50/60 Hz, 0.75 A
maximum. Refer to
Wall Mounting a Single NetVanta 3140 (P/N 1700341F1) on page 28
for
connection details.
NetVanta 3120/3130 Series Front Panel LEDs
Table 1 on page 24
describes the NetVanta 3120 Series and NetVanta 3130 Series front panel LEDs.
Table
2 on page 25
describes the NetVanta 3140 front panel LEDs.
Table 1. NetVanta 3120/3130 Series Front Panel LEDs
LED
Color
Indication
STAT
Green (flashing)
The unit is powering up. On power up the
STAT
LED flashes
rapidly for five seconds, during which time the user can escape
to boot mode. The factory default switch on the back of the unit
must be pressed while
the
STAT
LED is flashing green to
escape to boot mode. Refer to
Factory Default Switch on
page 19
for more information.
Green (solid)
The power is on and self-test passed.
Red (solid)
The power is on, but the self-test failed or the boot mode (if
applicable) code could not be booted.
WAN
(NetVanta 3130
only)
Off
The interface is administratively down.
Green (solid)
The link is up and everything is operational.
Green (flashing)
The port has activity.
Red (solid)
An alarm condition is occurring on the WAN interface, or there
is a self-test failure.
Amber (solid)
The unit is in test.
DBU
(NetVanta 3120/
3130 with DBU)
Off
The DBU interface is administratively down.
Green (solid)
The DBU interface is enabled.
Green (flashing)
The unit is in dial backup.
Red (solid)
An alarm condition is occurring on the DBU interface, or there
is a self-test failure.
Amber (solid)
The unit is in test.
ETH1
(NetVanta 3120
only)
Off
The port is administratively disabled or does not have link.
Green (solid)
The port is enabled and the link is up.
Amber (flashing)
The port has activity (transmit or receive).
INET
(NetVanta 3120/
3130 without DBU)
Off
PPP or PPPoE is not connected, IP has no IP address via
DHCP, or IP is static.
Green (solid)
PPP or PPPoE is connected or IP has an address via DHCP.
Green (flashing)
WAN interface is attempting to obtain an IP address via DHCP.
SWITCH
(
1
through
4
)
Off
The port is administratively disabled or does not have link.
Green (solid)
The port is enabled and the link is up.
Amber (flashing)
The port has activity (transmit or receive).
VPN
Off
No encrypted traffic.
On
Encrypted traffic present.