NetVanta 3000 Series Hardware Installation Guide
OVERVIEW
61200860L1-34L
Copyright © 2006 ADTRAN, Inc.
29
Figure 9. NetVanta 3205 (DC version) Rear Panel Layout
NetVanta 3205 Rear Panel Interfaces and LEDs
SLOT 1 NET/DBU Option Slot
The
SLOT 1 NET/DBU
option slot supports various NIM plug-in option modules. These option
modules are described in the section
10/100BaseT Ethernet Interface and Activity LEDs
The Ethernet port (
ETH 0/1
) is an RJ-45 connector with LEDs. The amber activity LED flashes when
data traffic is being sent or received on the Ethernet port. The green link LED is on when the router has
a good connection to the LAN. The Ethernet port provides the following:
•
10BaseT or 100BaseT with a single connector
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) which provides for local management and
configuration (via a DB-9 female connector).
Power Connection
The rear panel has a power input for connection to the power supply. Power supplies are shipped with
final destinations in mind. For example, domestic routers are shipped with a wallmount supply and
international routers are shipped with a universal input lump-in-line supply with the appropriate
cables. All of the 1U-high products have universal power supplies and are shipped with the appropriate
cable. Please refer to
on page 66 for connection details.
Connection directly to an external modem requires a cross-over cable.
