NetVanta 1600 Series Hardware Installation Guide
Unit Installation
61700568F1-34A
Copyright © 2011 ADTRAN, Inc.
29
Installing XAUI Interface Modules
XAUI interface modules (XIMs) are installed into the rear panel option module slots. XIMs can be safely
installed by following these instructions:
Figure 7. XIM Installation
•
Electronic modules can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electrical
components. Place modules in antistatic packing material when transporting or
storing. When working on modules, always place them on an approved antistatic mat
that is electrically grounded.
•
Always remove power from the unit prior to removing or installing a module.
•
Improper installation may result in damage to the modules.
Instructions for Installing the XIMs
Step
Action
1
Remove power from the unit.
2
Use a screwdriver to remove the cover plate from the appropriate option slot in the NetVanta
base unit.
3
Slide the option module into the option slot until the module is firmly seated against the chassis
(see
).
4
Secure the screws at both edges of the module using a screwdriver.
5
Connect the cables to the associated device(s).
6
Restore power to the unit.
®
120 WATT POWER SUPPLY
DISCONNECT ALL POWER CABLES PRIOR
TO REMOVAL OF POWER SUPPLY
CAUTION
AC INPUT
X1
X2
RPS - 12VDC
1700460F1
STACKING XIM
1
2
1700470F1
®
