ADTRAN NetVanta 1224STR PWR Hardware Installation Manual Download Page 15 | Manualshive

Page: 15 / 48

background image

61200590E1-34B

Copyright © 2013 ADTRAN, Inc.

15

1.

INTRODUCTION

This hardware installation guide describes the NetVanta 1224STR DC unit’s physical characteristics, lists
its features and specifications, introduces basic functionality, and provides installation instructions.

For information on switch configuration for a specific application, refer to the configuration guides provided on
the

ADTRAN Support Community

. For details on the command line interface (CLI), refer to the

Command Reference Guide

. All other related documents are also available online at

http://supportforums.adtran.com

.

2.

PHYSICAL DESCRIPTION

The NetVanta 1224STR DC is a managed switch housed in a 1U-high rack-mountable metal enclosure that
includes a DC power supply. The front panel contains 24 10/100Base-T Ethernet interfaces (RJ-45),

one Gigabit

Ethernet interface that provides one fixed RJ-45 connector, and one standard small form-factor pluggable (SFP)
slot for fiber connectivity.

This section includes a list of features and specifications, a list of shipping contents, and a description of the
unit’s front and rear panel designs. For additional information, refer to the following sections:

•

Mounting Options on page 36

•

Supplying Power to the Unit on page 38

•

Installing Dial Backup and Network Interface Modules on page 39

•

Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1) on page 41

Features and Specifications

•

Physical Interfaces

• 24 10/100Base-T Ethernet interfaces on the front panel

• One 1000Base-T Gigabit Ethernet interfaces on the front panel (SFP slots for fiber

connectivity/RJ-45 connectors for copper connectivity)

• Integrated DB-9, EIA-232 console port (DCE) on the rear panel

• Modular network interface on the rear panel

•

Stacking

•

Spanning Tree Support (802.1D and 802.1w)

•

Link Aggregation (802.3ad)

•

VLAN Support (802.1Q), up to 255 active VLANs

•

Priority QoS (802.1p)

•

Management

• Console

• Telnet CLI

• SSH CLI

• SNMP V2

• Port mirroring

•

DC Power: 24 to 48 VDC

•

Mechanical Specifications

• Housing: 1U-high metal enclosure (1.72-inch H x 17.22-inch W x 7.8-inch D)

«
...
13
14
15
16
17
...
»

Summary of Contents for NetVanta 1224STR PWR

















































Reviews:

No comments

Related manuals for NetVanta 1224STR PWR

Brand: H3C Pages: 6

OfficeConnect 3CP4144

Brand: 3Com Pages: 4

OfficeConnect 3CP4144

Brand: 3Com Pages: 2

Brand: H3C Pages: 60

Brand: H3C Pages: 149

Brand: 3Com Pages: 27

Brand: Jetter Pages: 35

Brand: Lanner Pages: 2

HAWA-Frontside 60/B

Brand: hawa Pages: 28

Brand: Klark Teknik Pages: 50

Brand: Watchguard Pages: 30

Brand: Ubiquiti Pages: 20

Hotwire 8775 MSDSL

Brand: Paradyne Pages: 10

Brand: Aurora Pages: 6

Brand: Airlinkplus Pages: 20

Brand: ZyXEL Communications Pages: 23

Brand: Planet Pages: 54

Brand: National Instruments Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands