ADTRAN ISU 2x64, User Manual

Page: 27 / 165

61200051L1-1D ISU 2x64 Dual Port ISDN Service Unit User Manual
13
Chapter 3
Installation
After unpacking the unit, immediately inspect it for possible
shipping damage. If damage is discovered, file a claim immedi-
ately with the shipping carrier, then contact ADTRAN Technical
Support.
Each ISU 2x64 is provided with an eight-foot power cord termi-
nated by a three-prong plug which connects to a grounded power
receptacle.
ADTRAN ISU 2x64 part numbers 1200051L1, 1200051L2, and
1200051L5 require a grounded 115 VAC, 60 Hz receptacle for
power.
ADTRAN ISU 2x64 part numbers 1200051L3, 1200051L4 and
1200051L6 require a 230 VAC, 50 Hz receptacle for power.
NETWORK CONNECTION
An eight-pin RJ-45 modular jack on the rear panel of the ISU 2x64
allows connection to ISDN Basic Rate service provided by the
telephone company or to a leased type of service. This leased ser-
vice can be dedicated 2B1Q data service or a nailed-up circuit that
provides a dedicated connection between end points such as a
limited distance modem or LAD circuit.
If using ISU 2x64, part number 1200051L1 or 1200051L3, connect
the telephone company provided ISDN Basic Rate U-Interface to
the RJ-45 connector marked ISDN IFC. An external NT1 is not
needed in this configuration.