ADTRAN HDSL 3192 HTU-C Installation And Maintenance Practice Download Page 36 | Manualshive

Page: 36 / 52

background image

HDSL 3192 HTU-C Installation and Maintenance Practice

28

61247004L1-5A

Alarm History Screen

The Alarm History screen illustrated in

provides detailed information on the alarm

history of the HDSL and T1 spans. Information provided includes alarm location, type, first
and last time/date, current status, and count.

Figure 16. Alarm History Screen

Circuit ID:HNTSVLALHDSL                                      MM/DD/YY hh:mm:ss
                              T1 Alarm History
LOCATION      ALARM       FIRST             LAST              CURRENT   COUNT
-------------------------------------------------------------------------------
HTU-C        RED(LOS)                                         OK       000
(DSX-1)      YELLOW                                            OK       000
             BLUE(AIS)                                         OK       000
HTU-R        RED(LOS)                                         OK       000
(DS1)        YELLOW                                            OK       000
             BLUE(AIS)                                         OK       000
                              HDSL Span History
-------------------------------------------------------------------------------
SPAN 1        LP1 HLOS                                         OK       000
             LP2 HLOS                                         OK       000
HTU-C        LP1 MRGN                                         OK       000
             LP2 MRGN                                         OK       000
HRE-1        LP1 MRGN                                         OK       000
             LP2 MRGN                                         OK       000

Press: C to clear history : H to scroll span alarms : M for main menu

«
...
34
35
36
37
38
...
»

Summary of Contents for HDSL 3192 HTU-C





















































Reviews:

No comments

Related manuals for HDSL 3192 HTU-C

All in One Printer

Brand: Baracoda Pages: 42

Brand: Xinje Pages: 57

Brand: Rane Pages: 4

Brand: Zonet Pages: 8

Brand: mikroElektronika Pages: 3

Brand: Blackrock Microsystems Pages: 27

Marconi OMS 1200

Brand: Ericsson Pages: 136

Brand: ZALMAN Pages: 7

CNPS7000A Series

Brand: ZALMAN Pages: 9

Brand: JUMO Pages: 60

PowerBeam PBE-5AC-400-ISO

Brand: Ubiquiti Pages: 23

Brand: TP-Link Pages: 4

Brand: Zhone Pages: 53

Brand: Inspired Energy Pages: 5

Brand: Hi-flying Pages: 59

Brand: Hama Pages: 10

DMX-Relais 2 INRUSH

Brand: DMX4ALL Pages: 18

IntelliStripe 65

Brand: Magtek Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands