ADTRAN HDSL 3192 HTU-C Installation And Maintenance Practice Download Page 3

Page: 3 / 52

61247004L1-5A

iii

Revision History

Conventions

The following typographical conventions are used in this document:

This font

indicates a cross-reference link.

This font

indicates screen menus, fields, and parameters.

HIS

FONT

indicates keyboard keys (

NTER

). Keys that are to be pressed simultaneously

are shown with a plus sign (

indicates that the

key and

key should be pressed at the

same time

This font

indicates references to other documentation and is also used for emphasis.

This

font

indicates on-screen messages and prompts.

This

font

indicates text to be typed exactly as shown.

This font

indicates silk-screen labels or other system label items.

This font

is used for strong emphasis.

NOTE

Notes inform the user of additional, but essential, information or
features.

CAUTION

Cautions inform the user of potential damage, malfunction, or
disruption to equipment, software, or environment.

WARNING

Warnings inform the user of potential bodily pain, injury, or death.

Revision

Date

Description

April 2008

Initial release

Summary of Contents for HDSL 3192 HTU-C





















































Search results

Summary of Contents for HDSL 3192 HTU-C

Reviews:

Related manuals for HDSL 3192 HTU-C

Brands by name

Popular brands

ADTRAN HDSL 3192 HTU-C, Installation And Maintenance Practice

Search results

Summary of Contents for HDSL 3192 HTU-C

Reviews:

Related manuals for HDSL 3192 HTU-C

Brands by name

Popular brands