manualshive.com logo in svg

ADTRAN Express XRT, User Manual, Page: 94 / 111

Share
Download
ADTRAN Express XRT User Manual Download Page 94

Appendix C. Status Buffer Messages

80

Express XRT User Guide

61202.153L3-1

Phone # Req'd 

Phone number required for AutoSpid determination.

PPP COMPRESSION UP

Unit connected with compression.

PPP LINK LOOPBACK

Network link is looped backed.

PPP Timeout

PPP negotiation failed.

PROTOCOL_ERROR

Call control error.

PUMPIO: dpump-quit

Rate adaption stopped due to DTE error.

Rcv Cause XXX

Undefined cause message received.

REQ_CHANNEL_NOT_AVAIL

The channel type requested is currently not available.

Remote not ISU

Bonding negotiation determined the far-end unit is not another 
ISU product.

RESOURCE_UNAVAIL

The requested resource is unavailable.

RESP_TO_STAT_ENQ

Response to status enquiry.

Restarting Rate

Unit restarts DTE rate.

Retrieve

Voice call is retrieved from a holding state.

Ring

An incoming call on either the first or second channel (third chan-
nel if call waiting) entered the Ring state.   The calling phone num-
ber is displayed if available.

S cmd not = or ?

Proper syntax not used.

Summary of Contents for Express XRT
















































































































Reviews:

No comments