ADTRAN Express XRT User Manual Download Page 35 | Manualshive

Page: 35 / 111

ADTRAN Express XRT User Manual Download Page 35

Chapter 2. Installation

61202.153L3-1

Express XRT User Guide

21

Three icons appear in the Tool Tray at different times representing
three different states of the Express Configuration Wizard Tray
Tool.

The icon illustrated in Figure 2-11 indicates the external analog
modem is connected to the Express XRT and is enabled. Double
clicking on this icon causes the Express Configuration Wizard
Tray Tool to disable the external analog modem.

Figure 2-11

Express XRT Disabled, External Analog Modem Enabled

The icon illustrated in Figure 2-12 indicates the external analog
modem is not connected and/or not enabled.

Double clicking on this icon enables the external modem when
connected to an Express XRT.

Figure 2-12

Express XRT Enabled, External Analog Modem Disabled

The icon illustrated in Figure 2-13 indicates that the Express Con-
figuration Wizard Tray Tool is in an unknown state. This icon
may appear if the Express XRT is not connected to a COM port on
the PC. Double clicking on this icon instructs the Express Config-
uration Tray Tool to refresh the connection status.

Figure 2-13

Unknown State

«
...
33
34
35
36
37
...
»

Summary of Contents for Express XRT
















































































































Reviews:

No comments