ADTRAN Express 4100, User Manual

Page: 92 / 213

Chapter 3. Terminal Menu Operation and Structure
3-42 Express 4100/4110 User Manual 61200176L2-1
Route/Private
Write security: 3; Read security: 5
When set to Yes, the Express 4100/4110 will not advertise this static
route entry. A setting of No (def) means any static route added for
this profile is advertised using RIP.
Route/Hops
Write security: 3; Read security: 5
This value is the metric or number of hops that RIP will use in
advertising the static route. The range is 1 to 16 where 1 is the
default. The value 16 is considered an infinite distance in RIP and
is, in effect, poisoning the route.
Route/Force IP
Write security: 3; Read security: 5
When set to Yes, the Express 4100/4110 will force the PPP peer to
use the IP address in the IP/Net for this profile as its WAN IP
address. Normally this is set in the No (def) position.
IP/RIP
The RIP parameters can be adjusted from their defaults under this menu.
The RIP parameters for all WAN connections are set on a per-session
basis.
RIP/Mode
Write security: 3; Read security: 5
The Express 4100/4110 will perform RIP over the WAN connection
when this is set to On (def).
RIP/Protocol
Write security: 3; Read security: 5
The Express 4100/4110 can perform version 1, V1 (def), or version 2,
V2
, of RIP on this WAN connection.