ADTRAN Express 4100, User Manual

Page: 67 / 213

Chapter 3. Terminal Menu Operation and Structure
61200176L2-1 Express 4100/4110 User Manual 3-17
Static Routes/Private
Write security: 4; Read security: 5
When set to No, the Express 4100/4110 will advertise this static route
using RIP. Otherwise, setting to Yes means that the route is kept private.
IP/IP Router
The IP router is configured under this menu as follows.
IP Router/Mode
Write security: 3; Read security: 5
When this option is set to On (def), the Express 4100/4110 will advertise
and listen to routes from other IP routers. If Off, the route table is still
used but only static routes are used for routing IP packets and only the
Ethernet port is used. IP packets can be sent over the WAN, but only
when bridged.
IP/RIP
Write security: 3; Read security: 5
The Routing Information Protocol (RIP) is supported by the Express
4100/4110. The following parameters are required for setting up the
mode on the Ethernet port:
RIP/Mode
Write security: 3; Read security: 5
This option turns RIP On (def) or Off.
RIP/Protocol
Write security: 3; Read security: 5
Version can be V1 (def) or V2.
RIP/Method
Write security: 3; Read security: 5
Split Horizon Only routes not learned on the Ethernet
port are advertised.
Poison Reverse
(def)
All routes are advertised, including
routes learned from the Ethernet port.
These routes are poisoned.