ADTRAN Express 4100, User Manual

Page: 90 / 213

Chapter 3. Terminal Menu Operation and Structure
3-40 Express 4100/4110 User Manual 61200176L2-1
Authentication/Rx Password
Write security: 0; Read security: 1
This is the password or secret that is used to authenticate the PPP peer.
This is only necessary when Configuration/Security/Authentication =
Connection List
.
Authentication/Caller ID
Write security: 1; Read security: 3
Incoming calls can be verified using the ISDN supplied caller identifier
when this is set to Yes. When set to No (def), the caller identifier is not
checked.
Authentication/Call ID 1
Write security: 1; Read security: 3
The caller identification from the ISDN incoming call is compared to this
number, starting from the right digits.
Authentication/Call ID 2
Write security: 1; Read security: 3
The caller identification from the ISDN incoming call is compared to this
number, starting from the right digits.
Connection List/IP
The IP menu contains the parameters for exchanging IP data with the PPP
peer. Static routes can also be created from here for IP dial-on-demand
applications.
IP/Mode
Write security: 3; Read security: 5
Setting to On (def) will permit this connection profile to negotiate PPP
IPCP with the PPP peer for exchanging of IP packets.
IP/NAT
Write security: 3; Read security: 5
The Express 4100/4110 can perform Network Address Translation. This
feature is most widely used when connecting to the Internet. The Ether-