ADTRAN 1200270L1, Manual

Page: 48 / 132

Chapter 5. Configuring Network Options
5-2 DSU III ARdc User Manual 61200270L1-20
Figure 5-1. Setting Loop Rate Options
The default factory setting is A
UTO
. When configured to A
UTO
, the DSU
will automatically attempt to adapt to the loop rate. If the loop rate is
known, select the rate from the menu. The various loop rates and format
selections are listed in Table 5-1 with the equivalent AT commands that
perform the same configuration functions.
Table 5-1. Loop Rate Commands
Front Panel AT Command
1=AUTO %B0
2=2.4K %B1
3=4.8K %B2
4=9.6K %B3
5=19.2K %B4
6=38.4K %B5
7=56K %B6
8=64K clear channel %B7
1=AUTO
2=2.4K
3=4.8K
4=9.6K
1=LOOP RATE 5=19.2K
6=38.4K
7=56K
1=NETWORK OPT. 8=64K
2=NETWORK ADDR
3=REMOTE CONFIG.
1=LOCAL
4=NETWORK TYPE
5=CLOCK SOURCE
3=CONFIG 2=DTE OPTIONS
2=REMOTE ENTER ADDRESS 3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND